The Dynamic Simulation of Stems and Soil Cutting with Coleseed Single-disc Colter Based on LS-dyna

ZHANG Jian; WANG Ying; WANG Shuhong; ZHOU Xunqian

doi:10.16211/j.issn.1004-390X(n).2015.06.017

JOURNAL OF YUNNAN AGRICULTURAL UNIVERSITY（Natural Science） > 2015 > 30(6): 941-945. > DOI: 10.16211/j.issn.1004-390X(n).2015.06.017

ZHANG Jian, WANG Ying, WANG Shuhong, et al. The Dynamic Simulation of Stems and Soil Cutting with Coleseed Single-disc Colter Based on LS-dyna[J]. JOURNAL OF YUNNAN AGRICULTURAL UNIVERSITY（Natural Science）, 2015, 30(6): 941-945. DOI: 10.16211/j.issn.1004-390X(n).2015.06.017

Citation:

PDF (2469 KB)

The Dynamic Simulation of Stems and Soil Cutting with Coleseed Single-disc Colter Based on LS-dyna

1.
Bijie Polytechnic School, Bijie 551700, China
2.
Science and technology limited liability company of Chang Feng, Lanzhou 730000, China
3.
Lanzhou Institute of Technology, Lanzhou 730000, China
4.
Bijie Agriculture Machinery Research Institue, Bijie 551700, China

More Information

Received Date: June 20, 2014
Revised Date: March 03, 2015
Published Date: November 15, 2015

Graphical Abstract

Abstract

Abstract

Colter is the core component of coleseed seeder. In order to improve simulation precision of the finite element method in the complex soil environment, we built the soil model which close to the actual environment, as well as understand the stems influence on cutting resistance. The simulation was carried out through soil and stems cut by the colter of the mountainous regions small manual labour coleseed using the LS-dyna software in this study, under the colter with 0.84m/s and 15 r/s.The results showed that the maximum cutting resistance force was 14.4N when the colter cut soil, the maximum cutting resistance force was 536 N when colter cut stem and soil. The simulation rationality was verified by theoretical calculation, this study provided parameters optimization design for mountainous regions small manual labour coleseed seeder.
- coleseed,
- single-disc colter,
- LS-dyna,
- stems,
- soil,
- cutting

FullText(HTML)

References (16)

References

[1]	中国农业机械化科学研究院.农业机械化设计手册:上册[M]. 北京:中国农业科学技术出版社,2007:300-368.
[2]	[2] 于建群,钱力彬,于文静,等.开沟器工作阻力的离散元法仿真分析[J]. 农业机械学报,2009,40(6):53-57.
[3]	[3] 周明,张国忠,姚兴林.有限元法在土壤切削过程仿真中的应用[J]. 农机化研究,2009(9):190-193.
[4]	[4] 杨望,蔡敢为,杨坚.土壤直剪试验的动力学仿真[J]. 农业机械学报,2011,42(7):96-101.
[5]	[5] 夏俊芳,何小伟,余水生,等.基于ANSYS/LS-DYNA的螺旋刀辊切削有限元仿真[J]. 农业工程学报,2009,40(6):53-57.
[6]	[6] 薛子萱,吕新民,唐卫卫.螺旋刀具土壤切削过程仿真分析[J]. 农机化研究,2011(4):13-16.
[7]	[7] 涂成龙,张玉彪,刘丛强,等.典型岩溶区域主要土壤类型分布特征与表层土壤保有量估算[J]. 生态学杂志,2012,31(3):620-625.
[8]	[8] 李耀明,秦同娣友,陈进,等.玉米茎秆往复切割力学特征试验与分析[J]. 农业工程学报,2011,27(1):160-164.
[9]	[9] LIAO Yitao,LIAO Qingxi,SHU Caixia,et al. Matching of Cutting and Feeding Speed for Reaping Arundo donax L. Based on Ansys/LS-DYNA[J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(S1):30-34.
[10]	[10] 王芬娥,黄高宝,郭维俊,等.小麦茎秆力学性能与微观结构研究[J]. 农业机械学报,2009,40(5):92-95.
[11]	[11] 袁文胜,吴崇友,金诚谦.异型孔窝眼轮式油菜排种器设计与实验[J]. 农业机械学报,2009,40(5):72-75.
[12]	[12] 谭赞良,赵进辉,刘诗安,等.窝眼轮式油菜排种器充种性能的研究[J]. 农机化研究,2006(6):168-170.
[13]	[13] 李诗龙.油菜籽的物理特性浅析[J]. 中国油脂:2005,30(2):17-20.
[14]	[14] 翟立欣,姬长英,丁启朔,等.土壤-耕作部件相互作用有限元分析研究进展[J]. 农机化研究,2014(2):233-236.
[15]	[15] 徐中华,王建华.有限元法分析土壤切削问题的研究进展[J]. 农业机械学报,2005,36(1):134-137.
[16]	[16] 周明,张国忠,姚兴林.有限元在土壤切削过程模拟中的应用[J]. 农机化研究,2009(9):1190-193.

Cited By

Get Citation

PDF

XML

Article views (2106) PDF downloads (894)

Turn off MathJax

Article Contents

Abstract

References

The Dynamic Simulation of Stems and Soil Cutting with Coleseed Single-disc Colter Based on LS-dyna

Abstract

References

Catalog

Export File

Citation

Format

Content